Spec This

• Dim down options including deep dimming down to 0.1% (Dim to Dark) OR dim down to 1%
• Selectable dimming curves including linear, logarithmic, soft linear and square, enabling incandescent-like dimming

 
Spec This

• Dim down to 1% 

Look For

• Configurable minimum dimming levels
• Consistent minimum dimming level throughout operating range
• Programmable output currents in 1mA increments
• High resolution dimming delivering no visible steps throughout the dimming curve
• Complies with: NEMA - ANSI C137.1-2022; ESTA E1.3 (0-10V Analog Control), ANSI E1.11-2008 (R2018), ESTA DMX 512, USITT
• Addresses requirements of: California Title 24, ENERGY STAR^®

Look For

• Configurable minimum dimming levels
• Consistent minimum dimming level throughout operating range
• Programmable output currents in 1mA increments
• Electronic off/ dim to off capabilities, for shut off of driver output at lowest dimming signal input
• Complies with: NEMA - ANSI C137.1-2022; ESTA E1.3 (0-10V Analog Control)
• Addresses requirements of: ENERGY STAR, California Title 24, when SoftStart feature is selected

 
Spec This

• Controls through analog, 0-10V, OR end-to-end digital (LEDcode) communication OR nLight® supported including embedded controls OR SensorSwitch™ supported including embedded controls OR Complies with open lighting controls standards including 0-10V; DMX / RDM, DALI-2 (DT6 and DT8) and D4i
• Support for integrated or embedded devices with programmable auxiliary outputs 4-24V

 
Spec This

• Controls through analog, 0-10V OR nLight, including embedded controls, supported through analog 0-10V OR SensorSwitch, including embedded controls, supported through analog 0-10V
• Support for integrated or embedded devices with programmable auxiliary outputs 12/20/24V

Look For

• Isolated 0-10V input for protection against wiring errors. Complies with UL 8750 Supplement SF 3.1

Look For

• Isolated 0-10V input for protection against wiring errors. Complies with UL 8750 Supplement SF 3.1

 
Spec This

• Programmable color temperature range managed at local driver level. Color math includes intensity and color. (LightShape)
• nLight implementation support including embedded controls OR Complies with open lighting controls standards including DMX / RDM, DALI-2 (DT6 and DT8)

 
Spec This

• Not supported

Look For

• Supports Tunable White, Dim to Warm, Dynamic Dimming

 
Spec This

• No perceived timing difference at turn on, turn off and dimming

 
Spec This

• No perceived timing difference at turn on, turn off and dimming

Look For

• No flashes or flicker of light after driver output has been turned off (aka no popcorning effect)
• Start-up time at 750ms / 550ms for indoor applications
• Addresses requirements of: California Title 24

Look For

• No flashes or flicker of light after driver output has been turned off (aka no popcorning effect)
• Start-up time at <1 sec for indoor applications
• Instant turn on starting at -40C for outdoor applications
• Addresses requirements of: California Title 24, when SoftStart feature is selected

 
Spec This

• Complies with FCC title 47 part 15 class A & B

 
Spec This

• Complies with FCC title 47 part 15 class A 

 
Look For

• 2.5kV common and differential mode for indoor applications, complies with ANSI C62.41 Test Severity III - Cat A (ANSI C82.77-5-2017 Surge and Transient Standard) 

 
Look For

• 2.5kV common and differential mode for indoor applications, complies with ANSI C62.41 Test Severity III - Cat A (ANSI C82.77-5-2017 Surge and Transient Standard)
• 6kV common and differential mode for industrial applications, complies with ANSI C62.41 Test Severity III - Cat B (ANSI C82.77-5-2017 Surge and Transient Standard)

 
Spec This

• Not supported

 
Spec This

• Meets Power Quality Immunity requirements including standards on harmonics disturbances, voltage notching, requirements for capacitor voltage transients, impulse voltage transients, and withstands temporary of overvoltage of 130% rated input for 30 minutes (ZetaShield)
• Loss of neutral protection at nominal 277V & 480V with lifetime duration. Loss of neutral protection at nominal 347V for 30 min

• Low power consumption as luminaire is set to (electronic) off: standby power < 0.5W

• Low power consumption as luminaire is set to (electronic) off: standby power < 1W

• Environmental standards: complies with RoHS3, REACH Art 33, Living Building Challenge™ Red List exemption

• Environmental standards: complies with RoHS3, REACH Art 33, Living Building Challenge Red List exemption

• No audible sound: in compliance with ANSI C82.18 Class A

• No audible sound: in compliance with ANSI C82.18 Class A

• Thermal protection: programmable thermal protection with External NTC thermistor



• Ingress protection: indoor: IP-20 rated driver enclosure, NEMA type 1



• Global coverage with voltage and regulatory certification requirements (CE, ENEC, BIS, CSA, PSE, KC, RCM, TISI)

• Thermal protection:
  1. Indoor: programmable thermal protection with external NTC Thermistor
  2. Industrial/Outdoor: programmable thermal protection with external NTC thermistor & driver thermal protection

• Ingress protection: 
  1. Indoor: IP-20 rated driver enclosure, NEMA type 1
  2. Outdoor: IP-66 rated driver enclosure, NEMA type 4